Product Feature
The UWB (Ultra-Wideband) radar signal simulator based on FPGA (Field-Programmable Gate Array) uses FPGA to control a high-speed DAC (Digital-to-Analog Converter) to generate various UWB analog signals. It can be used for communication, radar, and other information transmission and detection applications, and falls within the field of information technology.
Product Image
Product Parameter
LAN port | 1GbE (RJ-45) |
Dimensions (H x W x D) (mm) | 50*190*280mm |
Weight (kg) | N.W.: 1.5 KG |
Supported clients | Windows 7 and above |
Software interface language | English, Simplified Chinese |
Environmental requirements | • Line voltage: 100 V to 240 V AC |
Frequency | Frequency range | 0.4GHz ~ 5.4GHz, center frequency software configurable |
Bandwidth | Instantaneous bandwidth | 5GHz |
Band flatness | 5dB@5GHz. | |
Physical distance | Distance between radar and simulator | 0.5m~10m, built-in amplifier, increased range |
Radar limitations | Adaptive radar EIRP range | -30dBm ~ +50dBm |
Target | Quantity | 1 independent target for distance, speed, RCS |
Operation mode | Stationary, moving, stationary + Doppler | |
Range | Range | 3~500m (excluding air gap) |
Step | 1mm, the most advanced technical indicators in the industry | |
Accuracy | ±1cm | |
Speed | Range | -720km/h ~ 720km/h |
Step | ≤0.01km/h | |
Accuracy | ±0.01 km/h | |
RCS | Range | -48dBsm ~+37 dBsm @ Airgap =2m; R=10m |
Step | 0.1dB | |
Accuracy | ±0.3dB (within 1 hour), ±0.5dB (within 72 hours) | |
Instrument capabilities | Signal generation | CW, FMCW |
Spectrum measurement | Time-frequency diagram, power diagram, spectrum, phase noise, EIRP, in-band spurious |